22.4 Company turnarounds
A management consultant may be asked to assist with a turnaround of a company that is in trouble. A turnaround strategy often involves total restructuring and reorganization, or constitutes a prelude to major restructuring, and usually affects all the functions and activities of a company. This is a particularly difficult strategic assignment. The consultant will probably be brought in at a very late stage, when bankruptcy may be imminent. He or she may be regarded as a potential saviour or the last hope. The management of the company is often paralysed and in panic, under extreme pressure from creditors, banks, trade unions, tax collectors and others.
Before accepting such an assignment, you should consider whether your experience is adequate for a task that carries so much risk and responsibility, and what the cost of failure will be. If you accept the assignment, you should make sure that your and the management’s roles are clearly defined and understood, since there will be no time for lengthy discussions and negotiations, and some measures will need to be approved and executed immediately. If you feel that senior management itself is the cause of the trouble, or one of the major causes, you should make it clear that personnel changes may be necessary before committing yourself to the assignment.
Aquick preliminary diagnosis will help to evaluate the overall situation. In particular, it is necessary to assess whether the company can still be rescued, and if so, how much this is likely to cost and whether the task is beyond the management’s capabilities. If it is too late, or the cost of a turnaround operation would be prohibitive, there may be no other solution than to sell or liquidate the company.
Following the preliminary assessment, it is not advisable, and often not possible, to carry out lengthy in-depth diagnostic studies. There is a crisis situation; some creditors have to be paid today, others tomorrow, and the most competent staff may be thinking of leaving the sinking ship. Emergency measures have to be taken: a dialogue with the creditors is essential, and resources have to be found to make the payments that cannot be postponed.
The emergency measures will involve decisions that produce immediate savings, or that stop further deterioration in the company’s financial condition (e.g. a recruitment freeze, restrictions on foreign travel, termination of temporary help, increased emphasis on timekeeping and work discipline, cuts in entertainment costs). Some of these measures will not produce major savings, but
- FOREWORD
- Plan of the book
- ABBREVIATIONS AND ACRONYMS
- 1.1What is consulting?
- 1.3How are consultants used? Ten principal ways
- 1.5Evolving concepts and scope of management consulting
- THE CONSULTING INDUSTRY
- 2.1A historical perspective
- 2.2The current consulting scene
- 2.3Range of services provided
- 2.4Generalist and specialist services
- 2.6Internal consultants
- 2.7Management consulting and other professions
- 2.8Management consulting, training and research
- 3.1Defining expectations and roles
- 3.2The client and the consultant systems
- 3.4Behavioural roles of the consultant
- 3.5Further refinement of the role concept
- 3.6Methods of influencing the client system
- 3.7Counselling and coaching as tools of consulting
- CONSULTING AND CHANGE
- 4.1Understanding the nature of change
- 4.3Gaining support for change
- 4.4Managing conflict
- 4.5Structural arrangements and interventions for assisting change
- CONSULTING AND CULTURE
- 5.1Understanding and respecting culture
- 5.2Levels of culture
- 5.3Facing culture in consulting assignments
- 6.2The professional approach
- 6.3Professional associations and codes of conduct
- 6.4Certification and licensing
- 6.5Legal liability and professional responsibility
- ENTRY
- 7.1Initial contacts
- 7.2Preliminary problem diagnosis
- 7.3Terms of reference
- 7.5Proposal to the client4
- 7.6The consulting contract
- DIAGNOSIS
- 8.1Conceptual framework of diagnosis
- 8.2Diagnosing purposes and problems
- 8.3Defining necessary facts
- 8.4Sources and ways of obtaining facts
- 8.5Data analysis
- 8.6Feedback to the client
- ACTION PLANNING
- 9.1Searching for possible solutions
- 9.2Developing and evaluating alternatives
- 9.3Presenting action proposals to the client
- IMPLEMENTATION
- 10.3 Training and developing client staff
- 10.4Some tactical guidelines for introducing changes in work methods
- 10.5 Maintenance and control of the new practice
- 11.1 Time for withdrawal
- 11.3 Follow-up
- 12.1Nature and scope of consulting in corporate strategy and general management
- 12.2 Corporate strategy
- 12.3 Processes, systems and structures
- 12.4 Corporate culture and management style
- 13.1 The developing role of information technology
- 13.3An overall model of information systems consulting
- 13.4 Quality of information systems
- 13.5 The providers of IT consulting services
- 13.6 Managing an IT consulting project
- 14.1 Creating value
- 14.3 Working capital and liquidity management
- 14.5 Mergers and acquisitions
- 14.7 Accounting systems and budgetary control
- 15.1 The marketing strategy level
- 15.2 Marketing operations
- 15.3 Consulting in commercial enterprises
- CONSULTING IN E-BUSINESS
- 16.1 The scope of e-business consulting
- 16.4 Dot.com organizations
- 17.1 Developing an operations strategy
- 17.2 The product perspective
- 17.3 The process perspective
- 17.4 The human aspects of operations
- 18.2 Policies, practices and the human resource audit
- 18.3 Human resource planning
- 18.6 Human resource development
- 18.7 Labour–management relations
- 18.8 New areas and issues
- 19.1 Managing in the knowledge economy
- 19.2 Knowledge-based value creation
- 19.3 Developing a knowledge organization
- 20.1Shifts in productivity concepts, factors and conditions
- 20.2 Productivity and performance measurement
- 20.4Designing and implementing productivity and performance improvement programmes
- 20.5Tools and techniques for productivity improvement
- 21.1 Understanding TQM
- 21.3 Principles and building-blocks of TQM
- 21.6 ISO 9000 as a vehicle to TQM
- 21.7 Pitfalls and problems of TQM
- 22.1 What is organizational transformation?
- 22.2 Preparing for transformation
- 22.3 Strategies and processes of transformation
- 22.4 Company turnarounds
- 22.5 Downsizing
- 22.8 Joint ventures for transformation
- 22.10 Networking arrangements
- 22.14 Pitfalls and errors to avoid in transformation
- 23.1 The social dimension of business
- 23.2 Current concepts and trends
- 23.3 Consulting services
- 23.5Consulting in specific functions and areas of business
- 24.1 Characteristics of small enterprises
- 24.4 Areas of special concern
- 24.6 Innovations in small-business consulting
- 25.1 What is different about micro-enterprises?
- 25.3 The special skills of micro-enterprise consultants
- 26.1 The evolving role of government
- 26.5 Some current challenges
- 27.1 The management challenge of the professions
- 27.2 Managing a professional service
- 27.3 Managing a professional business
- 27.4Achieving excellence professionally and in business
- 28.2 The scope of client services
- 28.3 The client base
- 28.5 Going international
- 28.6 Profile and image of the firm
- 28.7 Strategic management in practice
- 29.1 The marketing approach in consulting
- 29.2 A client’s perspective
- 29.3 Techniques for marketing the consulting firm
- 29.4Techniques for marketing consulting assignments
- 29.5 Marketing to existing clients
- 29.6 Managing the marketing process
- COSTS AND FEES
- 30.1 Income-generating activities
- 30.2 Costing chargeable services
- 30.5 Fair play in fee-setting and billing
- 30.8 Billing clients and collecting fees
- ASSIGNMENT MANAGEMENT
- 31.1 Structuring and scheduling an assignment
- 31.2 Preparing for an assignment
- 31.3 Managing assignment execution
- 31.4 Controlling costs and budgets
- 31.5 Assignment records and reports
- 31.6 Closing an assignment
- 32.1 What is quality management in consulting?
- Box 32.2 Responsibility for quality
- 32.2Key elements of a quality assurance programme
- 32.3 Quality certification
- 33.1 Operating workplan and budget
- 33.2 Performance monitoring
- 33.3 Bookkeeping and accounting
- 34.1Drivers for knowledge management in consulting
- 34.4 Sharing knowledge with clients
- 35.1 Legal forms of business
- 35.2 Management and operations structure
- 35.3 IT support and outsourcing
- 36.1 Personal characteristics of consultants
- 36.2 Recruitment and selection
- 36.3 Career development
- 36.4 Compensation policies and practices
- 37.1 What should consultants learn?
- 37.3 Training methods
- 37.4Further training and development of consultants
- 37.6 Learning options available to sole practitioners
- PREPARING FOR THE FUTURE
- 38.1 Your market
- 38.2 Your profession
- TERMS OF A CONSULTING CONTRACT
- CONSULTING AND INTELLECTUAL PROPERTY
- WRITING REPORTS
- SUBJECT INDEX